BRYTO NO. 5

Bryto No 5 is an aqueous synthetic general purpose grinding fluid.

Product Description

Bryto No 5 is a purpose formulated fully synthetic grinding fluid based on, conventional nitrite/amine technology.

The product contains no oils or soaps and it is readily soluble in water to give a pale green translucent stable solution.

Applications

The product is recommended for all surface grinding, cylindrical (internal and external) grinding, tool, and cutter grinding. It is recommended  for use in center-less operations.

Bryto No 5 is primarily for use in grinding ferrous components and therefore can be used on copper but will possibly cause staining,  therefore it is not suitable for aluminium.

Features and Benefits

Contains no oil

Does not create wheel glazing, thereby extending wheel life, reducing downtime and because the true and consistent reproduction of the wheel grit is maintained ,high throughput.

Effective at high dilutions.

The product functions at high dilutions leading to excellent cooling, improved visibility of the workpiece and rapid settling of grinding debris.

Excellent Corrosion Inhibition

Bryto No 5 shows excellent corrosion control, rusting is controlled even at high dilutions, the product does not leave a sticky residue on drying.

Packing, Storage and Handling

Bryto No 5 containers should be stored inside out of direct sunlight, protect from freezing. The product is available in 5, 20 and 210 litre drums.

The above are typical values and do not constitute a specification. Data in this bulletin is given in good faith and as a general guide without liability for specific performance.

Use

Bryto No 5 mixes easily with water, thedilutions below are given as a guideline:-

Stainless Steel 1 part to 180 parts water
Carbon Steel 1 part to 100 parts water
High duty iron 1 part to 50 parts water
Malleable iron 1 part to 80 parts water
Cast Iron 1 part to 40 parts water

Bryto no 5 operates best at room temperature excessive temperatures of > 65 º C should be avoided.

Product Characteristics

Appearance Translucent Green Liquid
SG @ 15 ºC 1,23
pH @ 5 % 10,3 Units
Corrosion Test (IP125) Pass at 1 part in 180

The above are typical values and do not constitute a specification. Data in this bulletin is given in good faith and as a general guide without liability for specific performance.